These arrows should be pointing in the direction that air flows through your system which is away from the supply ducts and typically toward the blower. Once you have ensured that power is shut off and located the filter take a moment to determine the direction air flows through the system.
If youre confused about which direction to install your filter please feel free give us a call at Jerry Kelly.
Furnace filter replacement air flow direction. Your old filter should have arrows showing which direction the air flows. If you have any questions about where your filter goes or how to install a new one your local Lennox Dealer can help. The arrow should ALWAYS point towards the return.
Some filters will include air flow arrows to ensure proper installation. Stand in front of the furnace and look for the ducts. Make sure the furnace is off.
How to determine air flow direction for furnace filter. The filters in downflow furnaces are located in the plenum or ductwork above the furnace. If arrows are present take note of the direction they are pointing so you can properly re-install the old one or install the new one.
Heres an easy way to figure out which way the air flow arrow goes. The arrow on your filter should always face the unit and away from the return air duct that carries the air that will be heated or cooled. This filter is located in the upper blower compartment.
If your furnace has this type return filter frame remove the door by pulling on it. The Arrow and Air Flow Direction To properly insert a new filter look for the arrow. You can look at the old filters arrows before you install your new filter and make sure that the new filters arrows face the same direction.
This means the air is moving downward in direction. The arrows should always point away from the supply air and toward the blower. If you are unsure about which direction you should install your filter dont hesitate to give Hydes a call.
A small wide-hinged door covers this box. Air filters have arrows printed on them that indicate which direction they should be installed. Get help from your Lennox Dealer.
Pull out the old filter and make note of how it goes into the slot. Start by turning off the furnace. When changing furnace filters many people wonder where the arrow of the filter should point towards.
The arrow must face toward the furnace and away from the return duct that pulls the air in need of heating or cooling. The filters go up into the plenum in a V shape. In some furnaces the air filter box is located adjacent to the furnace.
Slide the filter out of its channel. The system will take 2 filters. You have your new filter in hand and youre ready to handle the replacement.
The arrow points in the direction the air is flowing through the duct system. Most upflow furnaces have their filters located on the side or bottom of the furnace in a filter frame. Install the new air filter.
If you cant find an arrow which indicates the proper air flow there are a few additional things you can look for andor your filter will have no impact regardless of the direction. Dispose of it properly or store it away for later use. You will be able to view the filter inside the notch that you slide it in to.
Most furnaces will have a V shape filter system. Look for an arrow on the filter indicating airflow. HVAC systems push the cool or warm air out and pull spent air in recirculating the air throughout your home.
These arrows point to the direction of the airflow which should be toward your furnace or air handler. Remove the existing furnace filter which will be located inside the furnace or inside the return air vent. 3 Slide in the correctly sized fiberglass filter.
Remember any heating or cooling system that uses a fan to distr. Active carbon and soda. Most furnace filters are bi-directional does not matter which way the air travels.
Pull the old filter out and discard it. Securely slide the new filter in place of the old one making sure you follow the arrows printed on the sides of the filter frame. The arrow should always point in the direction the air is flowing.
Another way of determining the correct orientation of the filter is that the arrows always point toward the furnace itself. On the new filter find the arrow indicating the proper airflow direction. But sometimes you may not know which way the air is flowing.
This dramatically transforms your air quality and ensures that the interior of your car has lots of milling and great air quality. Remove the existing filter and look for an arrow that indicates the direction of airflow. A furnace filter has one side that allows it to breath fresh air through while the other side traps dust and particles from the air.
Open the air box door on the furnace if applicable and slide out the electronic filter. These arrows are always meant to point in the direction of the airflow. Ever wonder which way the arrow should point on your furnace air filterFind out right here.
If you have already replaced your filter and your system makes excessive. The Kootek Carbin Air Filter Replacement is a fantastic air filtration system with highway dust filters and pollen from 5-100 micron.